ZKT-890
window patching machine is a fully servo machine.This
machine could only be used for normal pasting.It
equipped with 8 groups of servo motors in paper feeder part,chain
rail pusher part, the suction belt part, gluing roller part, film
suction drum part, the cutting knife part and film feeding part.
Touch screen computer controls the machine, and has the magic eye
tracking compensation system, equal to every movement has the servo
to tracking.This
is a complete motion control system, error compensation system, high
precision! Intelligent operation, convenient staff training.
Structure
Characteristic
1.Servo
System
The
whole machine adopts intelligent motion control system (a total of 8sets of servo systems) and man-machine interface. The close
cooperation between the servo and the photoelectric sensor enables
the deviation of the product to be effectively monitored and
corrected at each parts, and finally make the high quality products
that customers need.
2.The
Paper Feeding Part
The
paper feeding part adopts servo photoelectric to feeding paper, input
the length and speed on the touch screen, so that make the paper
feeding is fast and accurate. Suitable for cardboard and corrugated
paper with laminating, reverse UV, nano UV, oil and water varnishing.
In addition, the punching part is reserved, which is suitable for
paper output smoothly of thin paper and slightly warped paper.
3.The Pin Paper Feeding Part
The
pin paper feeding part adopts servo control, which can be operated
directly on the touch screen, it can change the angle to adjust the
connection speed between the paper and the pin, so that make
different papers can be fed more stably and smoothly
4.The
Suction & Conveying Part
The
suction and conveying part adopts a combination of servo and blower,
which can change the wind force according to different paper
specifications, so that make the paper was always adsorbed on the
conveyor belt stably.
5.The
Gluing Part
The
gluing part is composed of servo motor, cylinder, photoelectric,
solenoid valve, 304 stainless steel roller, glue separating guide
plate, side limiter and gluing roller, which can be easily pulled out
for setting and cleaning conveniently.
Adjustable
glue separating guide plate to control the glue range and outflow
volume. After stopping machine, the cylinder can lift the gluing
roller and drive it with another independent servo motor to avoid the
glue from solidifying.
The
gluing roller can freely adjust its position axially and radially
without stop the machine.
Once
meet with double sheets or empty sheet in the gluing part, the gluing
part have the function of lifting glue, which prevents the glue from
contacting the suction belt effectively.
6.The
Film Cutting, Normal Pasting Part
The
film cutting, normal pasting parts are controlled by servo motor and
automatic deviation correction, with characteristic of high precision
and fast speed.
The
film mechanism also adopts servo control, which can be jogged as a
whole, fine-tuned left and right, and quickly aligned with the
window.
7.The
Film Feeding Part
The
film feeding part uses the air expansion shaft to load the film. The
tension control functionmakes the servo film feeding more stable,
eliminating stretching and reducing inertia.
At
the same time, it is also equipped with the function of printed film
side tracking and stop due to lack of film.
8.The
Collecting Part
The
collecting part has the counting function, which can be counted in
batches, and has automatic machine stop function when has paper jam.
Workflow
Chart
Technical
Parameters
Window
Style
Electrical
Configuration
Optional
Function
Samples
Packing
Photos
After
testing without no problem：
1.cleaning,
anti-rust oil, silica gel/desiccant
2.Plastic
bag and film
3.Vacuum
package
4.Non-fumigation
wooden box
Copy product links
Long by picture save/share
